Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They don't get rotten or rusty like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good shape.

Single-pane windows are relatively easy to replace and will usually fit into the frames of the past easily. If windows with double panes are joined by internal beading, it is harder to remove and replace the old panes. In this situation it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass yourself. It is also a good idea to lay down a drop cloth before you start working on the glass, so that any fragments of glass fall onto the fabric rather than on the floor where they can be trampled on and cause further damage.

Once the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional can come out and repair the window. This will also act as a barrier, upvc door repairs near me deterring any intruders from gaining entry to your home. If the gap is particularly large, you may want to consider using the security door repair with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. Over time, they can develop a number of problems such as sliding. A sagging uPVC windows can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from getting worse.

Repositioning the hinges could aid in fixing a window repair that is sliding. To do this, you'll need open the window to access the frame. Then, using an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and check for an appropriate fit. If you're happy with the fit, you can tighten the screws until they remain in place.

If you aren't able to move the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to loose their elasticity. It is crucial to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen. Often, this is caused by screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need close the window and then perform a test fit. The joints at the corners of the sash must align with the joint on the casing. If it doesn't, you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

It is crucial to act if you get up each morning to find mouldy walls and wet floors. Water leaks from windows not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature within your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or missing.

It is a fairly easy fix that can be done by any DIY expert. Based on the severity of the issue the caulking used previously might need to be removed before a new layer of caulk can be put on. When it comes to upvc door repairs near me repair, you must be careful not to over-caulk. This will only make your window more difficult to clean and lower its energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotten sills are other signs of water leakage. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely the problem is related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it blows open with an ease. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they can wear down over time. It's very simple to change the hinges on a window, but it's easier if someone else helps hold the frame.

Verify that the uPVC hinges are open and closed in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

The issue could be caused either due to opening the window in the wrong way or a faulty installation at the factory. This issue can be fixed by sending us a picture through our website and we will be more than happy to give you suggestions.

It is also crucial to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the chance of windows sticking and help prevent corrosion. This should be done at least once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. First, the hinges because of wear and tear, can become misaligned, this will cause a gap to form where the sash meets the frame. They can be repaired by giving them good clean, but when they're beyond repair, it might be necessary to get them re-aligned or replaced. The interlock, which is located on the hinge side of the window, can also be misaligned, and again it's possible to give them a clean but in some cases it might be necessary to have these replaced.

The next common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and let air escape through the gaps. Replacement of these with high-quality weatherstripping will help to stop draughts. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures and lessen the possibility of draughts.

Lastly, one of the most effective methods to reduce drafts is to use an draught excluder. These are typically fabric tubes that are filled with some type of filler. They can be placed on the windowsill on top. They will help keep cold air out and keep your home warm and cosy!

With a bit of regular maintenance and repairs your windows made of upvc will provide excellent security and insulation for your home. It is crucial to realize that all windows have a life span and there may come an point at which it is more cost-effective to replace them rather than repair them. So, if you are having issues with your upvc windows, upvc door repairs near me it's recommended to seek assistance from a professional as soon as you can.