Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They do not rot or rust like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, making it very dangerous and potentially fatal. It is important to take the time to make sure that you are doing everything you can to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. However If windows with double glazed window repairs panes are held in place by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this situation you'll need find some plastic spacers that assist the new pane to fit properly into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric, not onto the floor and could be trampled under.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional comes out and repair the window. It also acts as an obstacle to stop intruders from getting into your home. If the gap is particularly large, you might want to consider using an alarm door that comes with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. In time, they could develop a variety of issues, including sagging. A sagging uPVC window can cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from worsening.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to unblock the windows so you can reach the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after having repositioned your hinges. If you are happy with the fit of your window, tighten the screws to hold them in place.

If you can't reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, which causes them to loose their elasticity. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows remain watertight and secure from draughts.

uPVC handles may also loosen. Most often, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to shut the window and then perform an initial fitting. The corner joints of the sash should align with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it is important that you take action. The leaks of water from windows do not only lead to the destruction of your home's structure but also undermine your efforts to control the temperature within your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is damaged or is missing.

It is a fairly easy fix that can be completed by any competent DIYer. Based on the severity of the problem the old caulking may need to be removed before a new layer of caulk is applied. It is essential to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.

Check that any drainage holes have no debris inside them and that the sill pan is properly angled to drain away from the window. In more serious cases you may need to think about replacing the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to note that if the leak originates from the glass of your double-glazed windows, upvc window repairs it is more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it opens in an ease. These are easily replaced by any competent DIYer and can usually be completed in a matter of minutes.

Like any mechanical component hinges are prone to be damaged over time. It's easy to change a window hinge, but it's easier if someone helps you to hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. This can be done by looking for the arrows on each hinge. This shows which way the window should open.

The issue could be caused either by opening the window incorrectly or by a poor installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to give assistance.

It is also crucial to lubricate the hinges on a regular basis. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to open and close more easily. It also helps prevent corrosion and reduce the risk of sticking. This should be done at least every year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few various factors. Firstly the hinges, again because of wear and tear, may become displaced, which can cause gaps to develop between the sash and the frame. If they are damaged beyond repair, uPVC window repairs it might be necessary to get them re-aligned. The interlock may be disaligned. This is located on the hinge side and may need to be cleaned. In certain instances it is possible to replace the hinges.

The next most common cause of draughts is the window seals, these are prone to wear or damaged over time and will allow air to escape through these gaps. Installing high-quality weatherstripping is a good way to prevent draughts. Replace the upvc windows with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce the possibility of draughts.

Another method of reducing the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. They can help block out cold air and keep your home warm and cozy!

With a bit of regular maintenance and repair windows made of upvc will continue to provide a great level of insulation and security for your home. It is crucial to keep in mind that all windows eventually wear out and it may be cheaper to replace them rather than repair them. So, if you're experiencing problems with your upvc windows, it's recommended to seek assistance from a professional immediately.